PDA

View Full Version : Re: <VV> Transmission Mount Failure


Joe West
05-08-2005, 01:05 PM
------------------------------



Date: Tue, 14 Sep 1999 20:30:21 -0700

From: Steve Goodman <rearengine.steve@worldnet.att.net>

Re: <VV> Transmission Mount Failure



Monza67@aol.com wrote:

>

> Is there an easy way to tell if a late model trans mount is in the failure

> mode? I'm suspect of mine and need to know alittle more before I go thru the

> trouble of changeout.



Hello: Usually the mount will 'sag' and allow the powertrain to be low

on one side or maybe just drooping towards the front. With the car on

the ground, you can rock the car back and forth (or maybe side to side

is what I want to say) and the powertrain will rock also. If the mounts

are good, the powertrain will not have a rocking motion.



Do these mounts also have a catch so they won't totally

> fail and drop the trans like the engine mount has?

> Monza67, however mounts are on my '66 Corsa



The mounts have a big washer built into them. I have never seen a mount

completely fall out of the mounting although I admit to not having seen

it all.



Regards, Steve



><snip VV trailer>

******************************

This message was sent by the Corvair list, all copyrights are the property

of the writer, please attribute properly. To unsubscribe, send mail to

majordomo@skiblack.com with "unsubscribe virtualvairs" as the first

line of the message. Post mail to: virtualvairs@skiblack.com .

For help, send mail to: vv-help@skiblack.com .