Joe West
05-09-2005, 09:12 PM
----------
> From: Chris Busch[SMTP:cbusch@medservelink.com]
> Sent: Tuesday, November 02, 1999 10:36 AM
> To: Vairs (E-mail)
> RE: <VV> good book on pulling dents?
>
>
> http://www.motorguard.com/studweld.htm
>
> What do you guys think of this:
>
> The Magna-Spot 1000 and 1500 series guns incorporate a new low-heat
> transformer especially designed for today's high-strength steel uni-body
> vehicles. With plenty of power for any job, these welders virtually
> eliminate "Burn-Through" that can be a problem common to other welders.
>
> These are unique, solid quality, U.S. manufactured products that offer
> world
> class performance for today's collision repair professional. They are
> designed for instant welding of draw pins, molding rivets and for the
> "shrinking" of stressed material. Documented reports from users state a
> reduction in repair time without "Burn-Through", even on the most
> difficult
> and awkward dents. These Stud Guns feature a lightweight, ergonomic design
> with heavy-duty construction, low-heat transfer and the highest level of
> reliability. Try a Motor Guard Magna-Spot Stud Gun today and see the
> difference in superior results over existing models and methods.
>
> Magna-Spot 1000 Kit Includes:
>
> 1 Magna-Spot 1000 Gun
> 1 Slide Hammer
> 1 Storage Container
> 1 Electrode
> 100 2.0 mm Draw Pins
>
> >
> From: Chris Busch[SMTP:cbusch@medservelink.com]
> Sent: Tuesday, November 02, 1999 10:36 AM
> To: Vairs (E-mail)
> RE: <VV> good book on pulling dents?
>
>
> http://www.motorguard.com/studweld.htm
>
> What do you guys think of this:
>
> The Magna-Spot 1000 and 1500 series guns incorporate a new low-heat
> transformer especially designed for today's high-strength steel uni-body
> vehicles. With plenty of power for any job, these welders virtually
> eliminate "Burn-Through" that can be a problem common to other welders.
>
> These are unique, solid quality, U.S. manufactured products that offer
> world
> class performance for today's collision repair professional. They are
> designed for instant welding of draw pins, molding rivets and for the
> "shrinking" of stressed material. Documented reports from users state a
> reduction in repair time without "Burn-Through", even on the most
> difficult
> and awkward dents. These Stud Guns feature a lightweight, ergonomic design
> with heavy-duty construction, low-heat transfer and the highest level of
> reliability. Try a Motor Guard Magna-Spot Stud Gun today and see the
> difference in superior results over existing models and methods.
>
> Magna-Spot 1000 Kit Includes:
>
> 1 Magna-Spot 1000 Gun
> 1 Slide Hammer
> 1 Storage Container
> 1 Electrode
> 100 2.0 mm Draw Pins
>
> >