Joe West
05-29-2005, 11:53 AM
- ----- Original Message -----
From: "Rick Loving" <rloving@netzero.net>
To: "N. Joseph Potts" <pottsf@email.msn.com>
Sent: Friday, November 17, 2000 3:01 PM
RE: <VV> Questions regarding wheel rim.
> I do not have the rims in my possession , but I contacted the owner and
had
> him lay a straight edge across the back of the rim and then measure the
> distance from there to the back surface of the rim where it bolts to the
> drum. This distance was 3 5/8", I went out a did the same thing with a
> spare wheel that I had in my shed and the measure was 4 1/2 "(This was a
> 1960 rim, did the 60 use the same size rim as the 61-64?)(I know the 60
rim
> was different with the little bumps to hold the hubcap on but is that the
> only difference)
>
> Rick
>
>
From: "Rick Loving" <rloving@netzero.net>
To: "N. Joseph Potts" <pottsf@email.msn.com>
Sent: Friday, November 17, 2000 3:01 PM
RE: <VV> Questions regarding wheel rim.
> I do not have the rims in my possession , but I contacted the owner and
had
> him lay a straight edge across the back of the rim and then measure the
> distance from there to the back surface of the rim where it bolts to the
> drum. This distance was 3 5/8", I went out a did the same thing with a
> spare wheel that I had in my shed and the measure was 4 1/2 "(This was a
> 1960 rim, did the 60 use the same size rim as the 61-64?)(I know the 60
rim
> was different with the little bumps to hold the hubcap on but is that the
> only difference)
>
> Rick
>
>