Joe West
05-09-2005, 07:36 PM
------------------------------
Date: Fri, 29 Oct 1999 08:58:39 EDT
From: VairMech@aol.com
Re: <VV> Ignition combos
I have a Crane XR700
that I use a the triggering source,
>
I've noticed that when I inspected the inside of the dist, cap that
there is definate evidence that the arc from the rotor is firing on the very
lead edges of the pins.
>
>
>
Yes I have, and I advise all my customers not to buy them if they ask. With
this known problem I don't know why the vendors still sell them or promote
them.
This is an internal timing problem and I have tried to cure it on my own
vehicle and I got it better but could not cure it. The best thing to happen
is Pertronics.
Ken Hand
Date: Fri, 29 Oct 1999 08:58:39 EDT
From: VairMech@aol.com
Re: <VV> Ignition combos
I have a Crane XR700
that I use a the triggering source,
>
I've noticed that when I inspected the inside of the dist, cap that
there is definate evidence that the arc from the rotor is firing on the very
lead edges of the pins.
>
>
>
Yes I have, and I advise all my customers not to buy them if they ask. With
this known problem I don't know why the vendors still sell them or promote
them.
This is an internal timing problem and I have tried to cure it on my own
vehicle and I got it better but could not cure it. The best thing to happen
is Pertronics.
Ken Hand