Joe West
05-09-2005, 07:22 PM
------------------------------
Date: Thu, 28 Oct 1999 20:04:23 EDT
From: VAIRJEFF@aol.com
Re: <VV> Wiring Harness for an Early Dash Clock
Rich,
The wiring harness for the dash-mounted clocks are relatively simple to
duplicate. Gray and red wires only. Use plug ends from an existing harness
(dash or body) the black plugs and brass connectors are the same as elsewhere.
Contact me offline for a detailed description, or perhaps consult the
accessories manual. I can fax you a photo copy of the installation
instructions if you need them.
Jeff Williams
Date: Thu, 28 Oct 1999 20:04:23 EDT
From: VAIRJEFF@aol.com
Re: <VV> Wiring Harness for an Early Dash Clock
Rich,
The wiring harness for the dash-mounted clocks are relatively simple to
duplicate. Gray and red wires only. Use plug ends from an existing harness
(dash or body) the black plugs and brass connectors are the same as elsewhere.
Contact me offline for a detailed description, or perhaps consult the
accessories manual. I can fax you a photo copy of the installation
instructions if you need them.
Jeff Williams