Joe West
05-23-2005, 11:37 PM
- ----- Original Message -----
From: Chuck Kamas <Chuck.Kamas@harmonicinc.com>
To: <virtualvairs@skiblack.com>
Sent: Friday, September 08, 2000 7:16 PM
<VV> 66 Steering Wheel horn loose
> Hi all,
>
> I just finished replacing the turn signal lever in my 66 corsa. I
> reassembled the thing, but now the chrome horn ring is loose! I can not
> find any missing parts, and the blown up picture in the 66 shop manual is
> no use. There is not details of how to assemble the horn ring.
>
> I assembled it as follows:
>
> 1) installed the insulated metal stud that connects to the slip ring .
> 2) installed the thin metal ring.
> 3) installed the horn ring.
> 4) installed the 3 insulated screws.
>
> Help!
>
> Chuck Kamas
>
>
From: Chuck Kamas <Chuck.Kamas@harmonicinc.com>
To: <virtualvairs@skiblack.com>
Sent: Friday, September 08, 2000 7:16 PM
<VV> 66 Steering Wheel horn loose
> Hi all,
>
> I just finished replacing the turn signal lever in my 66 corsa. I
> reassembled the thing, but now the chrome horn ring is loose! I can not
> find any missing parts, and the blown up picture in the 66 shop manual is
> no use. There is not details of how to assemble the horn ring.
>
> I assembled it as follows:
>
> 1) installed the insulated metal stud that connects to the slip ring .
> 2) installed the thin metal ring.
> 3) installed the horn ring.
> 4) installed the 3 insulated screws.
>
> Help!
>
> Chuck Kamas
>
>